Invisipin®
The World’s First Solderable, Individual Conductive Elastomer Pin
- Pick and Place / Solder Reflow Compatible
- Infinitely Configurable
- Individually Replaceable
- 100% Electrically Tested
Unparalleled Performance!
- High compliance range
- < 1 dB loss @ 50GHz
- Up to 4 Amps continuous
- Ultra-Low Loop Inductance
Specifications:
Contact Resistance Performance and Product Distribution
Contact Resistance Performance and Product Distribution
The Invisipin is the best choice for board to board interconnect applications when superior performance is required. RDIS manufactures pins in two compliance ranges to help you balance your electrical and mechanical needs: standard compliance and low inductance.
Available Pitches:
- 0.40 mm
- 0.50 mm
- 0.65 mm
- 0.80 mm
- 1.00 mm
- 1.27 mm (and larger)
Typical Performance Specifications:
- DC Contact Resistance: < 25 mΩ, 0.8mm pitch over range, 15 mΩ, typical @ 30% compression
- Contact Resistance Deviation over Compliance Range: <15 mΩ, 0.80 mm pitch
- RF Loss @ 20GHz : <0.05db (Coax, 1 pin), <0.1db (Coax, 2 pins + substrate)
- RF Loss @ 50GHz : <1db (Coax, 1 pin)
- 1/2 Loop Inductance: 90pH (pitch dependent)
- Working Compliance Range (0.80mm Pitch):
- Low Inductance: 75um
- Standard: 150um
- High Compliance: 250um
- Outstanding Reliability
- Compression Set <15% with no change in contact resistance (1000 hr @ 110C)
- 10,000 hours pulsed DC @125C as well as 85C/85%RH
Full Simulation Models Available.
